News : The level of daily SPAM has reached insane proportions, all registrations are now manual. I ask you to send me an e-mail (john (at) murga (dot) org), to confirm that you want me to create an account for you.


Post Reply  Post Thread 
Pages (2): « First [1] 2 Next > Last »
murgaLua: cannot load shared libraries?
Author Message
pdinoto
Junior Member
**


Posts: 19
Group: Registered
Joined: Jun 2007
Status: Offline
Reputation: 0
Post: #1
murgaLua: cannot load shared libraries?

Hello,

I am trying to use murgaLua in a kind-of-embedded linux.
That is, a small linux I built using T2 (http://www.t2-project.org) which has a kdrive based X and busybox. Once built, I copied murgaLua (both std and _nonXft) and this is what I get when trying to execute it:

# ./bin/murgaLua
./bin/murgaLua: error while loading shared libraries: libsqlite3.so.0: cannon open shared object file: No such file or directory

of course, there is no such library, but since

# ldd ./bin/murgaLua

confirms it is "not a dynamic executable", I am a little puzzled.

Is this a glibc mismatch problem?

OTOH, I have a "development" version of that very same system, where I could build a matching murgaLua, but so far I had no luck with build-murgaLua-Linux.sh.

John, can you spare a sec and give us a "rebuild your murgaLua from sources" session? :-)

Regards!
///Pablo

08-17-2007 03:15 AM
Find all posts by this user Quote this message in a reply
pdinoto
Junior Member
**


Posts: 19
Group: Registered
Joined: Jun 2007
Status: Offline
Reputation: 0
Post: #2
RE: murgaLua: cannot load shared libraries?

Ok, I managed to build my own murgaLua "by hand" (used the script build-murgaLua-Linux.sh as a guide) on the same buildroot the "small linux" was built with.

I get my brand new murgaLua_nonXft that gives the same error.

I could not attach a file to this thread, so I am pasting strace for the failing murgaLua next.

Hope this helps!

08-17-2007 03:58 AM
Find all posts by this user Quote this message in a reply
pdinoto
Junior Member
**


Posts: 19
Group: Registered
Joined: Jun 2007
Status: Offline
Reputation: 0
Post: #3
strace ./bin/murgaLua

Code:
sh-3.2# strace ./bin/murgaLua
execve("./bin/murgaLua", ["./bin/murgaLua"], [/* 37 vars */]) = 0
old_mmap(0xc58000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOU
S, -1, 0xc58000) = 0xc58000
readlink("/proc/self/exe", "/root/murgaLua/bin/murgaLua", 4096) = 27
old_mmap(0x8048000, 1191936, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x804
8000
old_mmap(0x8048000, 1143099, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON
YMOUS, -1, 0) = 0x8048000
mprotect(0x8048000, 1143096, PROT_READ|PROT_EXEC) = 0
old_mmap(0x8160000, 25995, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0
x117000) = 0x8160000
mprotect(0x8160000, 25992, PROT_READ|PROT_WRITE) = 0
old_mmap(0x8167000, 15596, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0
) = 0x8167000
brk(0x816b000)                          = 0x816b000
open("/lib/ld-linux.so.2", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \10\0\000"..., 512) = 512
old_mmap(NULL, 94208, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fd3000
old_mmap(0xb7fd3000, 82352, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xb7fd3000
old_mmap(0xb7fe8000, 5536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x14000) = 0xb7f
e8000
close(3)                                = 0
munmap(0xc01000, 360448)                = 0
brk(0)                                  = 0x816b000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0777, st_size=13104, ...}) = 0
old_mmap(NULL, 13104, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7fcf000
close(3)                                = 0
open("/lib/libpthread.so.0", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0|G\0\000"..., 512) = 512
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fce000
fstat64(3, {st_mode=S_IFREG|0777, st_size=74780, ...}) = 0
old_mmap(NULL, 82400, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7fb9000
old_mmap(0xb7fca000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x
10000) = 0xb7fca000
old_mmap(0xb7fcc000, 4576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0
) = 0xb7fcc000
close(3)                                = 0
open("/lib/libdl.so.2", O_RDONLY)       = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\230\n\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0777, st_size=9952, ...}) = 0
old_mmap(NULL, 12416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7fb5000
old_mmap(0xb7fb7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x
1000) = 0xb7fb7000
close(3)                                = 0
open("/usr/X11/lib/libXext.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\224%\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0777, st_size=45984, ...}) = 0
old_mmap(NULL, 48828, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7fa9000
old_mmap(0xb7fb4000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x
a000) = 0xb7fb4000
close(3)                                = 0
open("/usr/X11/lib/libX11.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\274B\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0777, st_size=859240, ...}) = 0
old_mmap(NULL, 855848, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7ed8000
old_mmap(0xb7fa5000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0
xcc000) = 0xb7fa5000
close(3)                                = 0
open("/lib/tls/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory
)
stat64("/lib/tls/i686/sse2", 0xbfc182c4) = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/i686", 0xbfc182c4)     = -1 ENOENT (No such file or directory)
open("/lib/tls/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/sse2", 0xbfc182c4)     = -1 ENOENT (No such file or directory)
open("/lib/tls/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls", 0xbfc182c4)          = -1 ENOENT (No such file or directory)
open("/lib/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/i686/sse2", 0xbfc182c4)    = -1 ENOENT (No such file or directory)
open("/lib/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/i686", 0xbfc182c4)         = -1 ENOENT (No such file or directory)
open("/lib/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/sse2", 0xbfc182c4)         = -1 ENOENT (No such file or directory)
open("/lib/libsqlite3.so.0", O_RDONLY)  = -1 ENOENT (No such file or directory)
stat64("/lib", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0
open("/usr/lib/tls/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or direc                                 tory)
stat64("/usr/lib/tls/i686/sse2", 0xbfc182c4) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/i686", 0xbfc182c4) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/sse2", 0xbfc182c4) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls", 0xbfc182c4)      = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory                                 )
stat64("/usr/lib/i686/sse2", 0xbfc182c4) = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/i686", 0xbfc182c4)     = -1 ENOENT (No such file or directory)
open("/usr/lib/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/sse2", 0xbfc182c4)     = -1 ENOENT (No such file or directory)
open("/usr/lib/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib", {st_mode=S_IFDIR|0777, st_size=8192, ...}) = 0
writev(2, [{"./bin/murgaLua", 14}, {": ", 2}, {"error while loading shared libra"..., 36},                                  {": ", 2}, {"libsqlite3.so.0", 15}, {": ", 2}, {"cannot open shared object file", 30}, {":                                  ", 2}, {"No such file or directory", 25}, {"\n", 1}], 10./bin/murgaLua: error while loading                                  shared libraries: libsqlite3.so.0: cannot open shared object file: No such file or directo                                 ry
) = 129
exit_group(127)                         = ?
Process 30463 detached
sh-3.2# strace ./bin/murgaLua
execve("./bin/murgaLua", ["./bin/murgaLua"], [/* 37 vars */]) = 0
old_mmap(0xc58000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0xc58000) = 0xc58000
readlink("/proc/self/exe", "/root/murgaLua/bin/murgaLua", 4096) = 27
old_mmap(0x8048000, 1191936, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x8048000
old_mmap(0x8048000, 1143099, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x8048000
mprotect(0x8048000, 1143096, PROT_READ|PROT_EXEC) = 0
old_mmap(0x8160000, 25995, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0x117000) = 0x8160000
mprotect(0x8160000, 25992, PROT_READ|PROT_WRITE) = 0
old_mmap(0x8167000, 15596, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x8167000
brk(0x816b000)                          = 0x816b000
open("/lib/ld-linux.so.2", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \10\0\000"..., 512) = 512
old_mmap(NULL, 94208, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fe9000
old_mmap(0xb7fe9000, 82352, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xb7fe9000
old_mmap(0xb7ffe000, 5536, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x14000) = 0xb7ffe000
close(3)                                = 0
munmap(0xc01000, 360448)                = 0
brk(0)                                  = 0x816b000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0777, st_size=13104, ...}) = 0
old_mmap(NULL, 13104, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7fe5000
close(3)                                = 0
open("/lib/libpthread.so.0", O_RDONLY)  = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0|G\0\000"..., 512) = 512
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fe4000
fstat64(3, {st_mode=S_IFREG|0777, st_size=74780, ...}) = 0
old_mmap(NULL, 82400, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7fcf000
old_mmap(0xb7fe0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10000) = 0xb7fe0000
old_mmap(0xb7fe2000, 4576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7fe2000
close(3)                                = 0
open("/lib/libdl.so.2", O_RDONLY)       = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\230\n\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0777, st_size=9952, ...}) = 0
old_mmap(NULL, 12416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7fcb000
old_mmap(0xb7fcd000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0xb7fcd000
close(3)                                = 0
open("/usr/X11/lib/libXext.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\224%\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0777, st_size=45984, ...}) = 0
old_mmap(NULL, 48828, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7fbf000
old_mmap(0xb7fca000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa000) = 0xb7fca000
close(3)                                = 0
open("/usr/X11/lib/libX11.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\274B\1"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0777, st_size=859240, ...}) = 0
old_mmap(NULL, 855848, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7eee000
old_mmap(0xb7fbb000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xcc000) = 0xb7fbb000
close(3)                                = 0
open("/lib/tls/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/i686/sse2", 0xbffeee94) = -1 ENOENT (No such file or directory)
open("/lib/tls/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/i686", 0xbffeee94)     = -1 ENOENT (No such file or directory)
open("/lib/tls/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls/sse2", 0xbffeee94)     = -1 ENOENT (No such file or directory)
open("/lib/tls/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/tls", 0xbffeee94)          = -1 ENOENT (No such file or directory)
open("/lib/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/i686/sse2", 0xbffeee94)    = -1 ENOENT (No such file or directory)
open("/lib/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/i686", 0xbffeee94)         = -1 ENOENT (No such file or directory)
open("/lib/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/lib/sse2", 0xbffeee94)         = -1 ENOENT (No such file or directory)
open("/lib/libsqlite3.so.0", O_RDONLY)  = -1 ENOENT (No such file or directory)
stat64("/lib", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0
open("/usr/lib/tls/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/i686/sse2", 0xbffeee94) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/i686", 0xbffeee94) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls/sse2", 0xbffeee94) = -1 ENOENT (No such file or directory)
open("/usr/lib/tls/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/tls", 0xbffeee94)      = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/sse2/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/i686/sse2", 0xbffeee94) = -1 ENOENT (No such file or directory)
open("/usr/lib/i686/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/i686", 0xbffeee94)     = -1 ENOENT (No such file or directory)
ENOENT (No such file or directory)", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/libsqlite3.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("/usr/lib", {st_mode=S_IFDIR|0777, st_size=8192, ...}) = 0
writev(2, [{"./bin/murgaLua", 14}, {": ", 2}, {"error while loading shared libra"..., 36}, {": ", 2}, {"libsqlite3.so.0", 15}, {": ", 2}, {"cannot open shared object file", 30}, {": ", 2}, {"No such file or directory", 25}, {"\n", 1}], 10./bin/murgaLua: error while loading shared libraries: libsqlite3.so.0: cannot open shared object file: No such file or directory
) = 129
exit_group(127)                         = ?
Process 30484 detached

08-17-2007 04:02 AM
Find all posts by this user Quote this message in a reply
mikshaw
Senior Member
****


Posts: 522
Group: Registered
Joined: Apr 2007
Status: Offline
Reputation: 5
Post: #4
RE: murgaLua: cannot load shared libraries?

I'm not sure what you're expecting.
Unless you modify the source, or statically link the library, you will need libsqlite3.so.0 on the target machine to run murgaLua no matter where its built.

08-17-2007 05:55 AM
Find all posts by this user Quote this message in a reply
pdinoto
Junior Member
**


Posts: 19
Group: Registered
Joined: Jun 2007
Status: Offline
Reputation: 0
Post: #5
RE: murgaLua: cannot load shared libraries?

I understood murgaLua executable had all lua+fltk+sqlite used libraries compiled into it.

Since I don't need fltk libraries to run murgaLua, I did not expected to need libsqlite either.

Does it need anything else?

08-17-2007 06:36 AM
Find all posts by this user Quote this message in a reply
mikshaw
Senior Member
****


Posts: 522
Group: Registered
Joined: Apr 2007
Status: Offline
Reputation: 5
Post: #6
RE: murgaLua: cannot load shared libraries?

MurgaLua uses libsqlite the same way it uses libxft. They are both libraries that are accessed at runtime, and not statically linked into the binary. FLTK is a completely different situation. As I understand it FLTK is a set of headers, not a library, so the code needs to be statically bound to Lua in order to use it with Lua. I'm guessing that if FLTK could be used as a dynamic library it would be.

08-17-2007 07:58 AM
Find all posts by this user Quote this message in a reply
JohnMurga
Administrator
*******


Posts: 381
Group: Administrators
Joined: Apr 2007
Status: Offline
Reputation: 2
Post: #7
RE: murgaLua: cannot load shared libraries?

mikshaw, that is only true for the Linux builds ...

murgaLua CAN be compiled with sqLite statically (as is done for mac and windows).

I'll post instructions for this when I get home tonight.

(I've been away)

Cheers
JohnM

08-20-2007 09:33 PM
Visit this user's website Find all posts by this user Quote this message in a reply
mikshaw
Senior Member
****


Posts: 522
Group: Registered
Joined: Apr 2007
Status: Offline
Reputation: 5
Post: #8
RE: murgaLua: cannot load shared libraries?

Quote:
that is only true for the Linux builds

I assumed that, yes, but pdinoto's issue *is* with linux =o)

Welcome back.

08-20-2007 11:55 PM
Find all posts by this user Quote this message in a reply
JohnMurga
Administrator
*******


Posts: 381
Group: Administrators
Joined: Apr 2007
Status: Offline
Reputation: 2
Post: #9
RE: murgaLua: cannot load shared libraries?

mikshaw Wrote:

Quote:
that is only true for the Linux builds

I assumed that, yes, but pdinoto's issue *is* with linux =o)


:-)

Yup, but it's only necessary to change one line in the Makefile to make the
Linux build static like the windows/mac builds ... But I don't have the code here :-(

Cheers
JohnM

08-21-2007 12:15 AM
Visit this user's website Find all posts by this user Quote this message in a reply
mikshaw
Senior Member
****


Posts: 522
Group: Registered
Joined: Apr 2007
Status: Offline
Reputation: 5
Post: #10
RE: murgaLua: cannot load shared libraries?

I guess that would be the LDFLAGS line? Not much idea how it would be changed, though.

08-21-2007 01:57 AM
Find all posts by this user Quote this message in a reply
Pages (2): « First [1] 2 Next > Last »
Post Reply  Post Thread 

View a Printable Version
Send this Thread to a Friend
Subscribe to this Thread | Add Thread to Favorites

Forum Jump: