News : The level of daily SPAM has reached insane proportions, all registrations are now manual. I ask you to send me an e-mail (john (at) murga (dot) org), to confirm that you want me to create an account for you.


Post Reply  Post Thread 
murgaLua-0.5.PREVIEW ... Out now
Author Message
chrimo
Member
***


Posts: 94
Group: Registered
Joined: May 2007
Status: Offline
Reputation: 0
Post: #1
RE: murgaLua-0.5.PREVIEW ... Out now

Hi John,
after a very long birtday party, I'm now back and try to give you some more informations about murgaLua-0.5-pre at OSX 10.4.10 (PPC)...

make maosx output:

$>make macos
sh ../tools/embedLuaSocket.sh
sh ../tools/embedMurgaLuaLib.sh
make ../bin/murgaLua PLAT=macos
make[1]: `../bin/murgaLua' is up to date.
strip ../bin/murgaLua
../tools/upx --lzma ../bin/murgaLua
../tools/upx: ../tools/upx: cannot execute binary file
make: *** [macos] Error 126


As you see, make tries to execute UPX-Tools, while operating system is not correctly detected...

$(PLATS) :
        sh ../tools/embedLuaSocket.sh
        sh ../tools/embedMurgaLuaLib.sh
        $(MAKE) $(TARGET) PLAT=$@
        strip $(TARGET)$($@EXT)

ifeq ($@,macos)
        @echo "MacOS UPX not available, pack under Linux"
else
        echo $(PLAT)
        #../tools/upx$($@EXT) --lzma $(TARGET)$($@EXT)
endif

A simple output of the variable show the same effect (PLAT ==> none)
Just remarking the usage og UPX helps, but it is just a fake or bad workaround Big Grin


$>uname -a
Darwin m49svr4169g5.moccy.lan 8.10.0 Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC Power Macintosh powerpc

I haven't had time to made more investigations into this problem, but I try to find it out this week...

If I find some more time I can publish my robot-samples at this forum... Currently I have no own homepage available...

Bye Chrimo

07-22-2007 09:25 PM
Find all posts by this user Quote this message in a reply
Post Reply  Post Thread 

Messages In This Thread
RE: murgaLua-0.5.PREVIEW ... Out now - chrimo - 07-22-2007 09:25 PM

View a Printable Version
Send this Thread to a Friend
Subscribe to this Thread | Add Thread to Favorites

Forum Jump: